DupI3

Part Specs

DupI3.PartSpecs History

Hide minor edits - Show changes to output

June 29, 2015, at 03:41 PM by 50.193.251.105 -
Added lines 10-20:

[+Ebay extruder cooling fan:+] [[http://www.google.com/url?q=http%3A%2F%2Fwww.ebay.com%2Fitm%2F201312115626%3F_trksid%3Dp2057872.m2749.l2649%26ssPageName%3DSTRK%253AMEBIDX%253AIT&sa=D&sntz=1&usg=AFQjCNHVUvXVXLRoQmxaCc2NvysJP9mm9g|12v 40mm Fan]]

Specs:
*Connector: 2pin (3pin adaptor included) (We only need 2 wires fans but can use 3 wire fans and ignore the 3rd wire)
*MTBF: 30,000 Hours
*Noise: 14.00dBA  -Nice quiet fan!!!
*Airflow: 4.11CFM  (Correct airflow of 4.0CFM or better)
*Rated Voltage: 12V (correct 12V rating)
*Rated Current: 0.06A (current is a non issue)
*Dimensions: 40.0 x 40.0 x 10.0 mm  (correct same size as original)
Restore
June 21, 2015, at 11:10 PM by Jetguy -
Added lines 23-31:




----

!!!!!X and Y axis pulleys:

[[DupI3.XYPulley#specs|X and Y Axis Pulley Specs and Photos]]
Restore
June 04, 2015, at 09:47 PM by 98.122.86.250 -
Added line 17:
Restore
June 04, 2015, at 09:47 PM by 98.122.86.250 -
Added lines 13-16:
----

!!!!!Duplicator I3 Mosfets
[[mosfets|Board Mosfet information]]
Restore
June 03, 2015, at 08:01 PM by 50.193.251.105 -
Added line 17:
[[DupI3.ExtruderGear#gearspecs|Extruder Gear Specs and Photos]]
Restore
June 03, 2015, at 06:42 PM by 50.193.251.105 -
Added lines 12-15:

----

!!!!!Extruder Gear:
Restore
June 03, 2015, at 06:41 PM by 50.193.251.105 -
Changed line 11 from:
[http://www.digikey.com/product-search/en?FV=fff40012%2Cfff80052%2C38007e%2Cb814c4%2Cb852c0%2C2fc03bb%2C2fc0484%2C2fc051c%2C2fc0520%2C2fc0574%2C2fc05d2%2C9340010&k=40mm+fan&mnonly=0&newproducts=0&ColumnSort=58&page=1&stock=1&pbfree=0&rohs=0&quantity=&ptm=0&fid=0&pageSize=25|Digikey Fan Search with these Specs]
to:
[[http://www.digikey.com/product-search/en?FV=fff40012%2Cfff80052%2C38007e%2Cb814c4%2Cb852c0%2C2fc03bb%2C2fc0484%2C2fc051c%2C2fc0520%2C2fc0574%2C2fc05d2%2C9340010&k=40mm+fan&mnonly=0&newproducts=0&ColumnSort=58&page=1&stock=1&pbfree=0&rohs=0&quantity=&ptm=0&fid=0&pageSize=25|Digikey Fan Search with these Specs]]
Restore
June 03, 2015, at 06:41 PM by 50.193.251.105 -
Added lines 1-12:
!!!!!Extruder Cooling Fan Specs:
'''There are a million fan choices. Here are my "target" specifications to search for:'''

*40mm square
*10mm thick (can be 10.5mm in searches)
*12V
*At least 4.7 CFM airflow
*Reasonably quiet (say under 20db preffered but must meet airflow requirement above)
*Bearing of choice (not getting into ball bearing VS VAPO VS sleeve, Vs whatever they come up with next)

[http://www.digikey.com/product-search/en?FV=fff40012%2Cfff80052%2C38007e%2Cb814c4%2Cb852c0%2C2fc03bb%2C2fc0484%2C2fc051c%2C2fc0520%2C2fc0574%2C2fc05d2%2C9340010&k=40mm+fan&mnonly=0&newproducts=0&ColumnSort=58&page=1&stock=1&pbfree=0&rohs=0&quantity=&ptm=0&fid=0&pageSize=25|Digikey Fan Search with these Specs]
Restore