DupI3
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]]
Click to download the [[https://www.dropbox.com/s/cjgz6kek0l3x30j/PLA%20S3Dv3.fff?dl=0|S3D v3 Duplicator I3 PLA Profile]]
*[[Attach:config_I3.ini|Slic3r Configuration File (use import)]]
!!!Simplify3D:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]
Slicer Settings
DupI3.SlicerSettings History
Hide minor edits - Show changes to output
Changed lines 52-54 from:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]]
Click to download the [[https://www.dropbox.com/s/cjgz6kek0l3x30j/PLA%20S3Dv3.fff?dl=0|S3D v3 Duplicator I3 PLA Profile]]
to:
*Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]]
*Click to download the [[https://www.dropbox.com/s/cjgz6kek0l3x30j/PLA%20S3Dv3.fff?dl=0|S3D v3 Duplicator I3 PLA Profile]]
*Click to download the [[https://www.dropbox.com/s/cjgz6kek0l3x30j/PLA%20S3Dv3.fff?dl=0|S3D v3 Duplicator I3 PLA Profile]]
Added line 47:
[[#S3D]]
Changed lines 53-54 from:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]]
to:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]]
Click to download the [[https://www.dropbox.com/s/cjgz6kek0l3x30j/PLA%20S3Dv3.fff?dl=0|S3D v3 Duplicator I3 PLA Profile]]
Click to download the [[https://www.dropbox.com/s/cjgz6kek0l3x30j/PLA%20S3Dv3.fff?dl=0|S3D v3 Duplicator I3 PLA Profile]]
Added lines 17-18:
*[[Attach:config_I3.ini|Slic3r Configuration File (use import)]]
Changed lines 3-4 from:
[+Printer Setting. The following settings should be used in the Repetier Host software to connect to the Duplicator I3. Some of the settings may have to be tweaked to fit your setup (bed size, etc). Remember to Click ADD to add the settings then Click Apply:+]
to:
'''[+Printer Settings:+]'''
The following settings should be used in the Repetier Host software to connect to the Duplicator I3. Some of the settings may have to be tweaked to fit your setup (bed size, etc). Remember to Click ADD to add the settings then Click Apply:
The following settings should be used in the Repetier Host software to connect to the Duplicator I3. Some of the settings may have to be tweaked to fit your setup (bed size, etc). Remember to Click ADD to add the settings then Click Apply:
Changed lines 1-18 from:
!!!Cura:
to:
!!!!!Repetier Host:
[+Printer Setting. The following settings should be used in the Repetier Host software to connect to the Duplicator I3. Some of the settings may have to be tweaked to fit your setup (bed size, etc). Remember to Click ADD to add the settings then Click Apply:+]
*Connection (Serial Port will be Computer specific):
->Img:400*1024*Rep_I3_Connection.png
*Behaviour:
->Img:400*1024*Rep_I3_Behaviour.png
*Dimension:
->Img:400*1024*Rep_I3_Dimension.png
*Advanced:
->Img:400*1024*Rep_I3_Advanced.png
----
!!!!!Cura:
[+Printer Setting. The following settings should be used in the Repetier Host software to connect to the Duplicator I3. Some of the settings may have to be tweaked to fit your setup (bed size, etc). Remember to Click ADD to add the settings then Click Apply:+]
*Connection (Serial Port will be Computer specific):
->Img:400*1024*Rep_I3_Connection.png
*Behaviour:
->Img:400*1024*Rep_I3_Behaviour.png
*Dimension:
->Img:400*1024*Rep_I3_Dimension.png
*Advanced:
->Img:400*1024*Rep_I3_Advanced.png
----
!!!!!Cura:
Added lines 3-4:
*[[https://software.ultimaker.com|Cura download and info]]
Added line 23:
Added line 25:
Added lines 27-30:
[+Commercial (paid for) slicing software with mesh repair options. Powerful and fast.+]
*[[https://www.simplify3d.com|Visit the Simplify3D website]]
*[[https://www.simplify3d.com|Visit the Simplify3D website]]
Changed line 23 from:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]
to:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]]
Added lines 21-23:
!!!Simplify3D:
Click to download the [[Attach:DuplicatorI3.fff|S3D Duplicator I3 Profile]
Added lines 1-20:
!!!Cura:
These are the only parameters I had to change (apart from choosing Prusa i3 as a machine on the first startup wizard of Cura):
'''Basic tab:'''
* Layer height: 0.1mm or 0.2mm (I would first recommend 0.2mm)
* Print speed: 50mm/sec
* Printing temp: 190 C
* Bed temp: 45 C
* Filament: Diameter: 1.75 mm (you might wanna measure that more precisely if you have access to a digital caliper)
* Flow: 100% (I think this was the default already)
'''Advanced tab:'''
* Nozzle size: 0.4mm
* Travel speed: 100mm/sec
* Infill speed: 60mm/sec
All of the above parmaeters are VERY important to be changed from their defaults, otherwise you will for sure have many problems.
A bit unfortunate that the official Cura guide from Wanhao does not mention these parameters at all, e.g. that you need to change them from the default. Actually, to be honest, I have not tried the installed on the SD card, maybe somehow they already haved baked these parameter values in the installer somehow, but I doubt.
These are the only parameters I had to change (apart from choosing Prusa i3 as a machine on the first startup wizard of Cura):
'''Basic tab:'''
* Layer height: 0.1mm or 0.2mm (I would first recommend 0.2mm)
* Print speed: 50mm/sec
* Printing temp: 190 C
* Bed temp: 45 C
* Filament: Diameter: 1.75 mm (you might wanna measure that more precisely if you have access to a digital caliper)
* Flow: 100% (I think this was the default already)
'''Advanced tab:'''
* Nozzle size: 0.4mm
* Travel speed: 100mm/sec
* Infill speed: 60mm/sec
All of the above parmaeters are VERY important to be changed from their defaults, otherwise you will for sure have many problems.
A bit unfortunate that the official Cura guide from Wanhao does not mention these parameters at all, e.g. that you need to change them from the default. Actually, to be honest, I have not tried the installed on the SD card, maybe somehow they already haved baked these parameter values in the installer somehow, but I doubt.